Young modulus
英
美
网络 杨氏模量; 楊氏模量; 弹性模量; 杨氏弹性模量; 杨氏系数材料
双语例句
- Investigations on the Influence of the Translation of Plat Mirror on Young Modulus
平面镜的平移对杨氏模量影响的讨论 - Measuring the Young Modulus of Metallic Thread by Optical Fiber Displacement Sensor
用光纤位移传感器测量金属丝的杨氏模量 - The maximum stress, strain at rupture, and Young modulus were obtained for each group.
获得每组标本的最大断裂应力、应变和杨氏模量。 - Measurement of Young modulus of wood and the Materials Mechanics Performance
木材弹性模量的测量与材料力学性能 - Using Young modulus of apparatus, the hysteresis property of tension exerted by steel wire is analyzed, The experimental way and theoretical principle are provided to check the quality of springs.
利用杨氏模量测定仪对钢丝力的滞后特性进实验分析，为减少实验误差和检验弹簧的好坏提供了一种实验途径及理论依据。 - Measuring the Young modulus using ticker-timer as excitation source
用打点计时器做激发源测量杨氏模量 - By the reconstruction from the double-exposure hologram of cantilever under different conditions of strain, measuring the position coordinates of interference fringes in accordance with the ordinal number, Young modulus can be determined by means of least squares methods.
通过对悬臂梁受力前后双曝光全息图进行再现，测量出干涉条纹序数与相对应的位置坐标，再利用最小二乘法求杨氏模量。 - The rate of sound and young modulus of solid bar materials were measured with resonance interference method
用共振干涉法测量固体棒材中的声速和材料弹性模量的初步研究 - Remark on the Method of Young Modulus Determination for Elastic Body
弹性体杨氏模量测定方法综述&兼谈对实验教学改革的启示 - Analytic expression dependent of microscopic parameters on the Young modulus of metallic single crystal
由微观参量表示的金属单晶体杨氏模量的解析计算式 - And draw a curve represent the relationship between young modulus of different post-core crown combination and peak main stress distributed in the residual tooth structure.
同时还给出了不同冠核组合下的桩弹性模量同剩余牙本质内最大主应力峰值之间的关系曲线。 - The Simple Measurement of Young Modulus of Materials
材料杨氏弹性模量的简易测量 - A study for measuring young modulus with CCD
CCD测量杨氏模量的研究 - The uncertainty of Young modulus is analyzed in detail. The data processing of the change of the steel-wire's length is treated as unequal-accuracy and a more reasonable result is obtained.
详细分析了杨氏模量的测量不确定度，把钢丝长度变化的测量作为不等精度测量处理，从而得到更为合理的结果。 - The measuring principle of sensor PSD is introduced and the system for measuring Young modulus that is based on PSD is described in this paper.
介绍了PSD位置传感器的检测原理和一种基于PSD的钢丝杨氏弹性模量测量系统。 - The uncertainty calculation in measuring Young modulus
杨氏模量测定的不确定度计算 - According to the crystal model in atomic physics and by using analytic method of potential functions, an analytical expression dependent of microscopic parameters is given for the Young modulus of metallic single crystal.
根据原子物理晶体模型，采用原子间相互作用的势函数分析方法，得到了由微观物理量表示的金属单晶体杨氏模量的解析计算式。 - The Measurement of Young Modulus Based on the PSD Location Sensor
基于PSD位置传感器的杨氏模量测量 - The article researches the application of CCD in the measuring of young modulus.
本文研究CCD在杨氏模量测量中的应用。 - Measuring Young modulus of materials by the method of vibration reed
舌簧片振动法测杨氏模量 - Program Design for Treating Experimental data of Young Modulus
杨氏模量实验数据处理的程序设计 - It is shown that the wave velocity decreases with the decreasing of Young modulus and increasing damping coefficients;
波幅衰减系数随土模量和阻尼系数增大而增大，衰减系数与波速间近似成负线性相关规律。 - Intelligent photoelectric system for measuring Young modulus
测量杨氏模量的智能光电系统 - Application Of PSD IN Young Modulus Measurement
PSD位置传感器在杨氏弹性模量测量中的应用 - Application of Strain Gauge Sensor in Young Modulus Measurement
应变式传感器对测定杨氏模量的应用研究 - Improvement on the device for measuring dynamic Young modulus by resonance method
用共振法测定动态杨氏模量实验装置的改进 - Through the two different methods, this paper discusses how to develop the experimental simulation software: tensile test, compressive test, strain measurement of Young modulus and Poisson ratio.
通过以上两种不同的模拟方法，本论文分别阐述了拉伸破坏实验、压缩破坏实验以及电测法测定材料弹性模量和泊松比的仿真软件设计与开发的方法。 - The phase variance and error caused by frequency change, which exist in the experiment of measuring dynamic Young modulus by resonance method, are analyzed. By connecting coil and AC constant current source in series, the experiment device is improved.
指出了共振法测定动态杨氏模量实验中存在相位不一致且频率变化引起的误差，提出了在输入端串接补偿线圈和交流恒流源的改进方法。 - Furthermore, when loading rate increased, bending strength and young modulus of wheat and rice straw decreased. 2.
同时，当装载速率增加时，水稻和小麦秸秆的弯曲强度和弹性模量将会降低。 - Focusing on bias and scale factor ( SF), it is analyzed separately the influence of Young modulus and residual stress on the performance parameters.
针对零偏和标度因数两个指标，分别分析了杨氏模量和残余应力的温度效应对SRA性能参数的影响。